North American Electric PEXP365T-75-4 Explosion Proof Motor, 75 HP, 1800 RPM, 365T Frame, 208-230/460V, 3PH, NEMA Design B, 60HZ, 1.15 S.F., TEXP, Explosion Proof, Cast Iron, Prem Eff, Inverter Rated
EIS #:PEXP365T-75-4
EIS #:PEXP365T-75-4
Out of Stock
Min Qty:1
|Qty Increment:1
75 HP, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Stainless steel nameplate and zinc plated hardware, corrosion resistant epoxy paint, IP55 protection, Cast iron frame construction - Three-phase, 75 HP, Totally enclosed explosion proof (TEXP), 143T-365T frame, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions
$10,955.86 / Piece
Min Qty:1
|Qty Increment:1
75 HP, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Stainless steel nameplate and zinc plated hardware, corrosion resistant epoxy paint, IP55 protection, Cast iron frame construction - Three-phase, 75 HP, Totally enclosed explosion proof (TEXP), 143T-365T frame, Service factor: 1.15 @ 60 Hz, 1.0 @ 50 Hz, NEMA Design B Performance, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions
- Attributes
- Features
Attributes
General Information
Item NameExplosion Proof Motor
General Features
Net Weight957 lb
StandardsUL Listed, CSA + C + US Certification
Design & Construction
Bearing TypeBall
Frame Type365T
KVA CodeG
Performance Details
Speed Rating1800 rpm
Torque Rating221.8 lb-ft
Full Load Efficiency94.6% at 50Hz, 95.4% at 60Hz
1/2 Load Efficiency94.5%
3/4 Load Efficiency95.3%
Electrical Properties
Full Load Ampere209.4 A
HP Rating75 HP
Full Load Power Factor85%
1/2 Load Power Factor86%
Locked Rotor Ampere542.5 A
3/4 Load Power Factor90%
Physical Properties
Dimensions33.5 Inch L x 21.1 Inch H
Frame Size365.0
Number of Poles4
Shaft Diameter2.38 Inch
Weight957 lb
Shaft Length5.88 Inch
Features
- Meets or exceeds NEMA Premium� Efficiency Requirements defined by NEMA MG-1, Table 12-12
- Lifting provisions on 143T frame and above
- IP55 degree of protection
- Class I, Division I, Groups C and D and Class II, Division I, Groups E, F and G
- Dual voltage ratings suitable for part wind start on lower voltage
- Vacuum pressure impregnation for all windings
- Stainless steel nameplate and zinc plated hardware
- Feet are dual drilled for mounting flexibility
- NEMA design B performance
- Severe duty conversion kit available
- C-flange field conversion kits available
- 94.5 minimum efficiency
- Frequency Rating: 50/60�Hz
- Full Load Ampere: 191.3 - 173/86.5A at 208 - 230/460V, 209.4/104.7A at 190/380V
- Service Factor: 1.15 at 60Hz, 1 at 50Hz
- Torque Rating: 221.8 lb-ft (Full Load), 200 lb-ft (Break Down), 140 lb-ft (Locked Rotor)
- Voltage Rating: 208 - 230/460V at 60Hz, 190/380V at 50Hz