Elantas PDG Elan-Tron® E451 Two-Component Epoxy Resin, 10 lb/1 gal
MFR #:138129
EIS #:PDGE451G
MFR #:138129
EIS #:PDGE451G
Out of Stock
Min Qty:1
|Qty Increment:1
Elantas PDG Elan-Tron® E451 Two-Component Epoxy Resin, Epoxy Base Type, Room Temperature Cure Type, 1.6810 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, Within 10 - 16 hr Full Cure Time, 7 - 10 min At 110 °C/230 °F Gel Time, 67 Shore D Hardness, 100 (Parts By Weight) Mixing Ratio. - ELAN-Tron™ E 451 / C 105 is a two-component, room temperature curing, 100%-solids epoxy resin system.
$95.46 / US pound
Min Qty:1
|Qty Increment:1
Elantas PDG Elan-Tron® E451 Two-Component Epoxy Resin, Epoxy Base Type, Room Temperature Cure Type, 1.6810 g/cm3 (77 °F (25 °C)) Density, >94 °C (ASTM D93) Flash Point, Within 10 - 16 hr Full Cure Time, 7 - 10 min At 110 °C/230 °F Gel Time, 67 Shore D Hardness, 100 (Parts By Weight) Mixing Ratio. - ELAN-Tron™ E 451 / C 105 is a two-component, room temperature curing, 100%-solids epoxy resin system.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy Resin
Trade NameElan-Tron®
SeriesElan-Tron® E451
General Features
Net Weight13.8 - 14.2 lb/gal
Shelf Life12 Months
TypeTwo-Component
Design & Construction
Base TypeEpoxy
Cure TypeRoom Temperature
FormLiquid
Performance Details
Full Cure TimeWithin 10 - 16 hr
Gel Time7 min
Technical Details
Flash Point94 °C
Chemical Properties
Mixing Ratio100 (Parts By Weight)
Physical Properties
Container Size10 lb
Hardness67 Shore D
Features
- Convenient 1:1 volume mix ratio
- Thixotropic for vertical surfaces
- Room temperature or low bake cure
- Long pot life
- Chemical and moisture resistant
- Brush, spatula or putty knife application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 1-1/2 hr at 25 °C / 77 °F - 250g pot life
- + 0.2% (24 hours at 25 °C / 77 °F), + 0.4% (24 hours in boiling water) water absorption
- 0.9% (24 hours at 180 °C / 356 °F) weight loss
- filled, 100%-solids
- Container Size: 10 lb/1 gal
- Flash Point: >94 °C (ASTM D93)
- Density: 1.6810 g/cm3 (77 °F (25 °C))
- Gel Time: 7 - 10 min
Applications
- General Sealing, Patching and Bonding of Electrical Equipment, Sealant for Armature and Stator End Windings, Bus Bar and Switchgear Coating