Elantas PDG Ripley™ E468-2-7FC-55F Single-Component Epoxy VPI Resin
MFR #:Ripley™ E468-2-7FC-55F
EIS #:PH21-Ripley E468-2-7FC-55F
MFR #:Ripley™ E468-2-7FC-55F
EIS #:PH21-Ripley E468-2-7FC-55F
Elantas PDG Ripley™ E468-2-7FC-55F Single-Component Epoxy VPI Resin, Epoxy Base Type, 1.5528 g/cm3 (77 °F (25 °C)) Density, 2000 V/Mil At 0.5 Mil - 25 °C/77 °F, 1400 V/Mil At 0.5 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, 20% At 25 °C/77 °F (ASTM D638) Elongation, >94 °C (ASTM D93) Flash Point, 4 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 12 - 20 min At 135 °C/275 °F (Sunshine) Gel Time, 65 - 75 At 25 °C/77 °F Hardness, 2400 psi At 25 °C/77 °F Tensile Strength, 4000 - 8000 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2-7FC-55F is a single-component, heat-cured, 100% solids epoxy impregnating resin, mineral-filled for enhanced heat dissipation, secondary insulation.
$31.69
Select from the options below
Elantas PDG Ripley™ E468-2-7FC-55F Single-Component Epoxy VPI Resin, Epoxy Base Type, 1.5528 g/cm3 (77 °F (25 °C)) Density, 2000 V/Mil At 0.5 Mil - 25 °C/77 °F, 1400 V/Mil At 0.5 Mil - 25 °C/77 °F (After 24 hr in Water) Dielectric Strength, 20% At 25 °C/77 °F (ASTM D638) Elongation, >94 °C (ASTM D93) Flash Point, 4 hr At 135 °C/275 °F or 3 hr At 150 °C/302 °F Full Cure Time, 12 - 20 min At 135 °C/275 °F (Sunshine) Gel Time, 65 - 75 At 25 °C/77 °F Hardness, 2400 psi At 25 °C/77 °F Tensile Strength, 4000 - 8000 CP At 25 °C/77 °F Viscosity. - Ripley™ E 468-2-7FC-55F is a single-component, heat-cured, 100% solids epoxy impregnating resin, mineral-filled for enhanced heat dissipation, secondary insulation.
Product Options
Showing 2 out of 2 options
 | Container Size: 50 lb | EIS Part #: E46827FCPAIL | $ / US pound | |
| Container Size: 550 lb | EIS Part #: E46827FCDRUM | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NameEpoxy VPI Resin
Trade NameRipley™
SeriesRipley™ E468-2-7FC-55F
General Features
Net Weight12.8 - 13.2 lb/gal
Shelf Life6 Months
TypeSingle-Component
Design & Construction
Base TypeEpoxy
FormLiquid
Performance Details
Tensile Strength2400 psi
Full Cure Time4 hr at 135 °C/275 °F or 3 hr at 150 °C/302 °F
Gel Time12 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity4000 cP
Electrical Properties
Dielectric Strength2000 V/mil
Physical Properties
Elongation20% at 25 °C/77 °F (ASTM D638)
Hardness65 - 75 at 25 °C/77 °F
Features
- Flexible for excellent noise suppression
- No catalyst required
- High flash point
- UL recognized insulation systems up to class 240
- Vacuum-pressure impregnation, vacuum impregnation application methods
- Store below 25 °C / 77 °F in a dry controlled environment out of direct sunlight
- 47 - 52 °C (TMA) glass transition temperature
- 63 ppm / °C (below Tg), 142 ppm / °C (above Tg) coefficient of thermal expansion
- 0.01 at 1 kHz - 25 °C / 77 °F dissipation factor (ASTM D150)
- 3.4 at 1 kHz - 25 °C / 77 °F dielectric constant (ASTM D150)
- 7.0 x 10^15 ohm-cm at 25 °C / 77 °F volume resistivity (ASTM D257)
Applications
- The Ripley™ E 468 Product Line Is the Industry Standard for Impregnation of Transformers of All Sizes