North American Electric PE284T-25-4-ODP General Purpose Electric Motor, 25 HP, 1800 RPM, 284T Frame, 208-230/460V, 3PH, NEMA Design B, 60HZ, 1.15 S.F., ODP, Gen Purp, Cast Iron, Prem Eff, Inverter Duty
EIS #:PE284T-25-4-ODP
EIS #:PE284T-25-4-ODP
Out of Stock
Min Qty:1
|Qty Increment:1
25 HP, Service factor: 1.25 @ 60 Hz, 1.0 @ 50 Hz, Suitable for 575V @ 1.0, NEMA Design B Performance/ High starting torgue, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Heavy duty cast iron housing or rolled steel with corrosion-resistant epoxy paint, stainless steel nameplate and zinc plated hardware, IP23 protection, Condensation drain with plugs - Three-phase, 25 HP, rolled steel 1-20 HP, cast iron 15-300 HP, Open drip proof (ODP), 143T-449T frame, Service factor: 1.25 @ 60 Hz, 1.0 @ 50 Hz, Suitable for 575V @ 1.0, NEMA Design B Performance/ High starting torgue, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions
$2,718.71 / Piece
Min Qty:1
|Qty Increment:1
25 HP, Service factor: 1.25 @ 60 Hz, 1.0 @ 50 Hz, Suitable for 575V @ 1.0, NEMA Design B Performance/ High starting torgue, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions, Class F insulation system, Class B rise at full load, Class H vacuum pressure impregnation (VPI) resin for all windings, Heavy duty cast iron housing or rolled steel with corrosion-resistant epoxy paint, stainless steel nameplate and zinc plated hardware, IP23 protection, Condensation drain with plugs - Three-phase, 25 HP, rolled steel 1-20 HP, cast iron 15-300 HP, Open drip proof (ODP), 143T-449T frame, Service factor: 1.25 @ 60 Hz, 1.0 @ 50 Hz, Suitable for 575V @ 1.0, NEMA Design B Performance/ High starting torgue, F1/F2 reversible, Dual-drilled feet for mounting flexibility, Lifting provisions
- Attributes
- Features
- Applications
Attributes
General Information
Item NameGeneral Purpose Electric Motor
SeriesNA-230-F1AF-ODP-HDCI-IDM
General Features
TypeHeavy Duty
StandardsCSA + CE + US Certification, ISO 9001 Certification, Meets or exceeds NEMA Premium® Efficiency Requirements defined by NEMA MG-1, Table 12-12
Design & Construction
Bearing TypeBall
ConstructionHeavy Duty Cast Iron
DutyContinuous
Enclosure TypeOpen Dripproof
Frame Type284T
Insulation TypeClass F
KVA CodeG
Mounting TypeF1 Assembly - Foot
RotationReversible
Performance Details
Speed Rating1800 rpm
Full Load Efficiency93.6%
1/2 Load Efficiency92.5%
3/4 Load Efficiency93.6%
Torque Rating74.3 lb-ft
Electrical Properties
Frequency Rating60 Hz
Full Load Ampere30 A
Full Load Power Factor85%
1/2 Load Power Factor75%
HP Rating25 HP
Locked Rotor Ampere182 A
Phase3-Phase
Service Factor1
3/4 Load Power Factor83%
Voltage Rating230 V
Physical Properties
Dimensions24.8 Inch L x 16.6 Inch H
Frame Size284
Shaft Diameter1.875 Inch
Shaft Length4.62 Inch
Weight392 lb
Environmental Condition
Temperature Rating40 °C
Features
- Voltage rating: 208‐230/460V
- Locked rotor ampere: 182A at 460V
- Torque rating: 74.3 lb-ft (Full Load), 250 lb-ft (Break Down), 160 lb-ft (Locked Rotor)
- Service factor: 1.25 at 60 Hz, 1 at 50 Hz
Applications
- General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in environments with minimal dust and moisture