Elantas PDG Elan-Cast® C-226 Hardener
MFR #:Elan-Cast® C-226
EIS #:PH21-Elan-Cast C-226
MFR #:Elan-Cast® C-226
EIS #:PH21-Elan-Cast C-226
Elantas PDG Elan-Cast® C 226 Hardener, Room Temperature Cure Type, 72 h At 25 °C or 2 h At 80 °C Full Cure Time, 10 - 20 min At 25 °C Gel Time, 83 - 88 Shore D Hardness, 100:12 (Parts By Weight) Mixing Ratio, 155 °C Temperature Rating, 800 - 1300 CP At 25 °C (Mixed) Viscosity. - Elantas PDG Elan-Cast® C 226 Hardener.
$64.18
- $74.59
Select from the options below
Elantas PDG Elan-Cast® C 226 Hardener, Room Temperature Cure Type, 72 h At 25 °C or 2 h At 80 °C Full Cure Time, 10 - 20 min At 25 °C Gel Time, 83 - 88 Shore D Hardness, 100:12 (Parts By Weight) Mixing Ratio, 155 °C Temperature Rating, 800 - 1300 CP At 25 °C (Mixed) Viscosity. - Elantas PDG Elan-Cast® C 226 Hardener.
Product Options
Showing 2 out of 2 options
 | Container Size: 2 lb | EIS Part #: PDGC2262LB | $ / US pound | |
| Container Size: 42 lb | EIS Part #: C226PAIL | $ / US pound |
- Attributes
- Features
Attributes
General Information
Item NameHardener
Trade NameElan-Cast®
SeriesElan-Cast® C-226
Design & Construction
Base TypeEpoxy
Cure TypeRoom Temperature
Performance Details
Full Cure Time72 hr at 25 °C or 2 hr at 80 °C
Gel Time10 min
Chemical Properties
Mixing Ratio100:12 (Parts By Weight)
Viscosity800 cP
Physical Properties
Hardness83 - 88 Shore D
Environmental Condition
Temperature Rating155 °C
Features
- Vacuum potting, Meter-mixing, Atmospheric potting, Casting application method
- Low mix viscosity
- Autoclavable
- Two-component, filled, rigid epoxy resin system
- Room temperature / low heat cure
- 58 - 63 °C glass transition temperature
- Gel Time: 10 - 20 min
- Viscosity: 800 - 1300 cP