3M Kynar® MFP 2:1 Special Purpose Heat Shrink Tubing, 1/4", 4', Clear
MFR #:7100034433
EIS #:KYNAR.25X4M
MFR #:7100034433
EIS #:KYNAR.25X4M
In Stock
Min Qty:1
|Qty Increment:1
Pack:125/Box
3M™ heat shrink tubing LMFP is a cross-linked, thin-walled, heat-shrinkable tubing offering a high degree of mechanical strength and high temperature resistance. When heated in excess of 347 °F (175 °C), MFP tubing rapidly shrinks to a skintight fit.
3M™ Heat Shrink Tubing MFP is a cross-linked, thin-walled, heat-shrinkable tubing offering a high degree of mechanical strength and high-temperature resistance. Fabricated from polyvinylidene fluoride, the tubing has outstanding abrasion resistance and cut through properties in combination with high dielectric strength. It is inherently flame retardant, semi-rigid and highly resistant to most industrial fuels, chemicals and solvents.
$409.59 / 100 Foot
Pack: 125/Box
Min Qty:1
|Qty Increment:1
Pack:125/Box
3M™ heat shrink tubing LMFP is a cross-linked, thin-walled, heat-shrinkable tubing offering a high degree of mechanical strength and high temperature resistance. When heated in excess of 347 °F (175 °C), MFP tubing rapidly shrinks to a skintight fit.
3M™ Heat Shrink Tubing MFP is a cross-linked, thin-walled, heat-shrinkable tubing offering a high degree of mechanical strength and high-temperature resistance. Fabricated from polyvinylidene fluoride, the tubing has outstanding abrasion resistance and cut through properties in combination with high dielectric strength. It is inherently flame retardant, semi-rigid and highly resistant to most industrial fuels, chemicals and solvents.
- Attributes
- Features
- Documents
Attributes
General Information
Item NameHeat Shrink Tubing
Design & Construction
ColorClear
Insulation MaterialModified Polyvinylidene Fluoride
Minimum Shrink Temperature175 °C
Wall TypeThin
Performance Details
Tensile Strength5500 psi
Flame RetardantYes
Heat Aging4 hr
Shrink Ratio2:1
Low Temperature Flexibility-55 °C
Chemical Properties
Specific Gravity1.7
Electrical Properties
Dielectric Strength900 V/mil
Voltage Rating600 V
Physical Properties
Length4 ft
Wall Thickness0.012 Inch
Elongation350%
Expandable Diameter0.25 Inch
Recovered Diameter0.125 Inch
Environmental Condition
Temperature Rating-55 to 175 °C
Features
- Fabricated from polyvinylidene fluoride, the tubing has outstanding abrasion resistance and cutthrough properties in combination with high dielectric strength
- It is inherently flame-retardant, semi-rigid and highly resistant to most industrial fuels, chemicals and solvents
- When heated in excess of 175 °C (347 °F), MFP tubing rapidly shrinks to a skintight fit
- The tubing is readily marked by hot-stamp and print-wheel equipment
- When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter
- The recovered wall thickness is proportional to the degree of recovery
- Non-corrosive chemical effect
- Excellent fuel and oil resistance, solvent resistance, abrasion resistance, acids and alkalis resistance
- Self-extinguishing
- Low Temperature Flexibility: -55 °C
- Temperature rating: -55 to 175 °C
- Volume Resistivity: 10^14 Ohm-cm
- Wall Thickness: 0.012 Inch (Recovered)