Elantas PDG Pedigree® 600 S QC Polyester Impregnating Resin, 511 lb
EIS #:PDG600SQCDRUM
EIS #:PDG600SQCDRUM
Out of Stock
Min Qty:1
|Qty Increment:1
Elantas PDG Pedigree® 600 S QC Polyester Impregnating Resin, 3400 V/Mil (ASTM D149 - 1.5 Mil), 3800 V/Mil (ASTM D149 - 1.5 Mil) Dielectric Strength, 30 °C (ASTM D93) Flash Point, 163 °C to 177 °C/325 °F to 350 °F For 20 min Full Cure Time, 5 - 10 min At 100 °C/212 °F Gel Time, 84 Shore D Hardness, 235 - 305 CP At 25 °C/77 °F Viscosity. - Pedigree® 600 S QC is a 100%-reactive, unsaturated polyester resin in styrene monomer. It requires the addition of a peroxide catalyst for proper cure.
$12.56 / US pound
Min Qty:1
|Qty Increment:1
Elantas PDG Pedigree® 600 S QC Polyester Impregnating Resin, 3400 V/Mil (ASTM D149 - 1.5 Mil), 3800 V/Mil (ASTM D149 - 1.5 Mil) Dielectric Strength, 30 °C (ASTM D93) Flash Point, 163 °C to 177 °C/325 °F to 350 °F For 20 min Full Cure Time, 5 - 10 min At 100 °C/212 °F Gel Time, 84 Shore D Hardness, 235 - 305 CP At 25 °C/77 °F Viscosity. - Pedigree® 600 S QC is a 100%-reactive, unsaturated polyester resin in styrene monomer. It requires the addition of a peroxide catalyst for proper cure.
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NamePolyester Impregnating Resin
Trade NamePedigree®
SeriesPedigree® 600 S QC
General Features
Net Weight9.15 - 9.45 lb/gal
Shelf Life6 Months
Performance Details
Full Cure Time163 to 177 °C/325 to 350 °F For 20 min
Gel Time5 min
Technical Details
Flash Point30 °C
Chemical Properties
Viscosity235 cP
Electrical Properties
Dielectric Strength3400 V/mil
Physical Properties
Container Size511 lb
Container TypeDrum
Hardness84 Shore D
Features
- Chemically promoted for very short gel time and fast cure
- Low viscosity
- High heat distortion temperature
- High bond strength at elevated temperature
- Trickle application method
- Secondary insulation
- Dielectric Strength: 3400 V/Mil (ASTM D149 - 1.5 Mil), 3800 V/Mil (ASTM D149 - 1.5 Mil)
- Flash Point: 30 °C (ASTM D93)
- Viscosity: 235 - 305 CP at 25 °C/77 °F
- Gel Time: 5 - 10 min
- Viscosity: 235 - 305 cP
Applications
- For Impregnation of Motor Windings Including Stators and High-Speed Armatures