Elantas PDG RanVar™ B7-606 DAPC Precatalyzed Polyester Impregnating Resin
MFR #:RanVar™ B7-606 DAPC
EIS #:PH21-RanVar B7-606 DAPC
MFR #:RanVar™ B7-606 DAPC
EIS #:PH21-RanVar B7-606 DAPC
Elantas PDG RanVar™ B7-606 DAPC Precatalyzed Polyester Impregnating Resin, 1.2342 g/cm3 (77 °F (25 °C)) Density, 4200 V/Mil At ASTM D149 - 0.5 Mil, 3700 V/Mil At ASTM D149 - 0.5 Mil (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 2 hr At 175 °C (347 °F), 4 hr At 150 °C (302 °F) Full Cure Time, 15 - 30 min At 118 °C/245 °F (Sunshine) Gel Time, 500 - 800 CP At 25 °C/77 °F Viscosity. - RanVar™ B7-606 DAPC is a precatalyzed, heat cured, unsaturated polyester resin.
$20.71
- $23.02
Select from the options below
Elantas PDG RanVar™ B7-606 DAPC Precatalyzed Polyester Impregnating Resin, 1.2342 g/cm3 (77 °F (25 °C)) Density, 4200 V/Mil At ASTM D149 - 0.5 Mil, 3700 V/Mil At ASTM D149 - 0.5 Mil (After 24 hr in Water) Dielectric Strength, >94 °C (ASTM D93) Flash Point, 2 hr At 175 °C (347 °F), 4 hr At 150 °C (302 °F) Full Cure Time, 15 - 30 min At 118 °C/245 °F (Sunshine) Gel Time, 500 - 800 CP At 25 °C/77 °F Viscosity. - RanVar™ B7-606 DAPC is a precatalyzed, heat cured, unsaturated polyester resin.
Product Options
Showing 1 out of 1 options
 | Container Size: 545 lb | EIS Part #: B7606DAPC545LB | $ / US pound |
- Attributes
- Features
- Applications
- Documents
Attributes
General Information
Item NamePrecatalyzed Polyester Impregnating Resin
Trade NameRanVar™
SeriesRanVar™ B7-606 DAPC
General Features
Shelf Life12 Months
Design & Construction
FormLiquid
Performance Details
Full Cure Time2 hr at 175 °C (347 °F), 4 hr at 150 °C (302 °F)
Gel Time15 min
Technical Details
Flash Point94 °C
Chemical Properties
Viscosity500 cP
Electrical Properties
Dielectric Strength4200 V/mil
Features
- Outstanding bond strength at high-temperature
- Excellent tank stability
- High flash point
- Resistant to R-22, R-134a and R-123 refrigerants
- UL recognized insulation systems up to class 220
- Dip-and-bake, vacuum impregnation, vacuum-pressure impregnation application methods
- 47 Pounds at 25 °C / 77 °F, 19 Pounds at 150 °C / 302 °F helical coil bond strength (ASTM D2519 over MW 35)
- Secondary insulation
- Gel Time: 15 - 30 min
- Viscosity: 500 - 800 cP
Applications
- For Impregnation of Form Wound and Random Wound Motor and Generator Coils