MFR #:Ben-Har® 1151-FR-A
EIS #:PH21-Ben-Har 1151-FR-A
Series #:Ben-Har® 1151-FR-A
MFR #:Ben-Har® 1151-FR-A
EIS #:PH21-Ben-Har 1151-FR-A
Series #:Ben-Har® 1151-FR-A
Ben-Har 1151-FR sleeving is an extremely flexible silicone rubber coated fiberglass sleeving with outstanding flame retardant properties. - The special combination of a smooth fiberglass bore and flexible, elastomeric silicone coating allows this sleeving to expand and conform over larger dimensions, assuring a snug fit, permanent placement, and elastic self-fitting on components or terminals.
$0.91
- $2,032.51
Select from the options below
Ben-Har 1151-FR sleeving is an extremely flexible silicone rubber coated fiberglass sleeving with outstanding flame retardant properties. - The special combination of a smooth fiberglass bore and flexible, elastomeric silicone coating allows this sleeving to expand and conform over larger dimensions, assuring a snug fit, permanent placement, and elastic self-fitting on components or terminals.
Product Options
Showing 8 out of 21 options
Length: 500 ft | Gauge: 18 AWG | Color: White | EIS Part #: SRFRA18WHB | $ / Foot | ||
Length: 500 ft | Gauge: 16 AWG | Color: White | EIS Part #: SRFRA16WHB | $ / Foot | ||
Length: 500 ft | Gauge: 14 AWG | Color: White | EIS Part #: SRFRA14WHB | $ / Foot | ||
Length: 250 ft | Gauge: 12 AWG | Color: White | EIS Part #: SRFRA12WFB | $ / Foot | ||
Length: 50 ft | Gauge: 1.5 Inch | Color: White | EIS Part #: SRFRA1.5WAB | $ / Foot | ||
Length: 50 ft | Gauge: 1 Inch | Color: Black | EIS Part #: SRFRA1.0BAB | $ / Foot | ||
Length: 250 ft | Gauge: 8 AWG | Color: White | EIS Part #: SRFRA08WFB | $ / Foot | ||
Length: 250 ft | Gauge: 8 AWG | Color: Red Iron Oxide | EIS Part #: SRFRA08RFB | $ / Foot |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameSilicone Rubber Coated Sleeving
Trade NameBen-Har®
SeriesBen-Har® 1151-FR-A
Design & Construction
Braid TypeFiberglass
GradeA
Insulation MaterialSilicone Rubber
Insulation TypeClass H
Insulation Coating TypeSilicone
NEMA SpecificationNEMA TF-1 Type 5
Performance Details
Tear Strength70 psi
Tensile Strength875 psi
Electrical Properties
Breakdown Voltage8000 V
Dielectric Strength485 V/mil
Physical Properties
Elongation500%
Hardness35 +/- 5 Shore A
Features
- Excellent low temperature flexibility with outstanding flame retardant properties
- Compatible with common class H insulating varnishes
- Resistant to acids, alkalis, organic solvents and aliphatic hydrocarbons, slight swelling may be produced by aromatic solvents and chlorinated hydrocarbons
- Ketones and esters may cause deterioration
- Dielectric Grade: A
- Volume Resistivity: 2.48 Ohm-cm x 10^14 Ohm-cm
Applications
- Appliance Assemblies
- Wire Harnesses
- Transformer Leads
- Power Supplies
- Motor Coil and Heater Leads