Varflex Varglas Non-Fray Type HO Flexible Uncoated Sleeving
MFR #:Varglas Non-Fray Type HO
EIS #:PH21-Varglas Non-Fray Type HO
Series #:Varglas Non-Fray Type HO
MFR #:Varglas Non-Fray Type HO
EIS #:PH21-Varglas Non-Fray Type HO
Series #:Varglas Non-Fray Type HO
Varglas Non-Fray Sleeving is flexible, high-temperature secondary insulation made from closely braided, continuous filament fiberglass which has been heat-cleaned to remove impurities in the yarn and to retard fraying. - Type HO - heat cleaned and treated with an acrylic resin binder (natural or pigmented). There are four types available all of which are noncorrosive and nonflammable and not attacked by fungus.
$0.33
- $2,922.69
Select from the options below
Varglas Non-Fray Sleeving is flexible, high-temperature secondary insulation made from closely braided, continuous filament fiberglass which has been heat-cleaned to remove impurities in the yarn and to retard fraying. - Type HO - heat cleaned and treated with an acrylic resin binder (natural or pigmented). There are four types available all of which are noncorrosive and nonflammable and not attacked by fungus.
Product Options
Showing 8 out of 17 options
 | Length: 1000 ft | Gauge: 22 AWG | Color: Black | EIS Part #: VARHO22BJV | $ / Foot | |
| Length: 250 ft | Gauge: 4 AWG | Color: Black | EIS Part #: VARHO04BFV | $ / Foot | |
 | Length: 500 ft | Gauge: 22 AWG | Color: Natural | EIS Part #: VARGHO22NHV | $ / Foot | |
 | Length: 500 ft | Gauge: 20 AWG | Color: Red | EIS Part #: VARGHO20RHV | $ / Foot | |
| Length: 500 ft | Gauge: 18 AWG | Color: Red | EIS Part #: VARGHO18RHV | $ / Foot | |
| Length: 500 ft | Gauge: 18 AWG | Color: Natural | EIS Part #: VARGHO18NHV | $ / Foot | |
| Length: 500 ft | Gauge: 18 AWG | Color: Black | EIS Part #: VARGHO18BHV | $ / Foot | |
| Length: 500 ft | Gauge: 16 AWG | Color: Natural | EIS Part #: VARGHO16NHV | $ / Foot |
- Attributes
- Features
- Applications
Attributes
General Information
Item NameUncoated Sleeving
Trade NameVarglas Non-Fray
SeriesVarglas Non-Fray Type HO
General Features
TypeFlexible
Design & Construction
Braid TypeFiberglass
NEMA SpecificationNEMA TF-2
Performance Details
Tensile Strength500000 psi
Electrical Properties
Dielectric Strength1100 V
Physical Properties
Elongation4.5 - 4.9%
Features
- Binders are applied to further retard fraying and to hold sleeving round for cutting
- 2.55-2.58 g/cu.cm specific gravity
- Good resistance to most alkalies, resistance to acids is fair
- Effect of bleaches and solvents are unaffected
- Excellent resistance to sunlight and aging, not attacked by mildew
- 6.5-6.8 at 22 °C, 60 Hz dielctric constant
- 0.001-0.005 at 22 °C, 1MHz dissipation factor
- Up to 316 °C indefinitely, up to 616 °C for shorter periods thermal endurance
- -60 °C per UL 1441 cold bend
- Passes UL 1441 (VW-1) flame resistance, will not burn
- Types HO, HP and HM are available in a variety of colors which may be less vivid after exposure to 150 °C
- All four types are available in various wall thicknesses, since there is no impregnant that will provide dielectric protection at those extremes, these sleevings require heavy or multiple-wall thicknesses if used as primary insulation
- Volume Resistivity: 10^15 -10^16 Ohm-cm
- Dielectric Strength: 1100 - 1500V
- Temperature Rating: -60 to 16 °C
- Tensile Strength: 500000 - 550000 psi
Applications
- Thermal and Mechanical Protection of Insulated Wires and Sensor Leads in Consumer, Commercial, and Industrial Appliances and Lighting Fixtures, Outer Coverings for Resin Impregnated Circuitry
- Commercial and Industrial Applications
- Heating Appliances
- Electric Motors
- Resistors
- Lighting Fixture Transformers and Ballasts
- Wire Harness Assemblies