MFR #:LTHU101
EIS #:PH18-LTHU101
MFR #:LTHU101
EIS #:PH18-LTHU101
$3,963.94
- $7,633.79
Select from the options below
The lathe-type undercutter can be quickly attached in place of the tool post on any lathe. It can be mounted directly on the cross slide or on the slide carriage which is then mounted on the cross slide. Both horizontal and vertical commutators can be under cut. -
As undercutting is done from the side of commutator the saw or V-cutter is set level with the lathe centers. A spring between hardened washers under the pulley allows the spindle to move (float) up or down and follow and existing slot that is being re-cut.
Product Options
Showing 1 out of 1 options
Voltage Rating: 115 V | Spindle Size: 0.1875 Inch | EIS Part #: MARTINLTHU101A | $ / Piece |
- Attributes
- Features
- Documents
Attributes
General Information
Item NameUndercutter with Both Spindle
SeriesLTHU101
General Features
Net Weight28 lb
TypeLathe
Performance Details
Motor HP1/3 HP
Speed Rating2400 rpm
Electrical Properties
Frequency Rating60 Hz
Features
- If a fixed spindle is desired, the spring can be removed and the pulley turned over
- For attaching directly to lathe
- Speed Rating: 2400 rpm HSS saw, 4900 rpm Tungsten Carbide saw