SCS CTC061-RT-242-WW WS AWARE MONITOR, RELAY OUT, STANDARD REMOTES, 2 MONITORED METAL TOOLS
EIS #:SCCCTC061-RT-242WW
EIS #:SCCCTC061-RT-242WW
Out of Stock
Min Qty:1
|Qty Increment:1
A charge can be easily developed on a body during movements. WS Aware Workstation Monitor detects body voltage and alarms if it exceeds the preset level. Alarm thresholds for body resistance and body voltage are set at the factory but can be changed in the field. The WS Aware Workstation Monitor provides independent monitoring of four grounds – two tool grounds and two mat grounds. The CTC061-RT-242-WW uses Standard remotes, Relay out (outputs 0/20 mA logic level for relay input), and can monitor two metal tools.
$933.51 / Piece
Min Qty:1
|Qty Increment:1
A charge can be easily developed on a body during movements. WS Aware Workstation Monitor detects body voltage and alarms if it exceeds the preset level. Alarm thresholds for body resistance and body voltage are set at the factory but can be changed in the field. The WS Aware Workstation Monitor provides independent monitoring of four grounds – two tool grounds and two mat grounds. The CTC061-RT-242-WW uses Standard remotes, Relay out (outputs 0/20 mA logic level for relay input), and can monitor two metal tools.
- Attributes
- Features
Attributes
General Information
Item NameWS AWARE MONITOR
General Features
TypeStandard Remote
Design & Construction
Monitored Tools2
Data Output TypeRelay
Features
- Dual Workstation Continuous Monitor
Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 - Digital Signal Processing Technology
Applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components - Operator Body Voltage Detection
Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item - EMI Monitoring on Metal Grounds
Alarms if the grounded metal tools have high-frequency noise that could cause electrical overstress (EOS) damage - System Includes Monitor and Two Remote Terminals
Monitor can be installed at eye level, and remote terminals can be mounted at desired locations up to 10 feet away. Each remote terminal includes a monitored jack for operators and an unmonitored jack for visitors. - Relay Terminal
Outputs 0/20 mA logic level for relay input - Use with Dual-Wire Wrist Straps
See SCS Dual-Wire Wrist Straps - Replaceable Dual-Wire Operator Jack
Use the CTA245 Replacement Jack PCB to easily replace the operator jack without the use of solder - Calibration Unit Available for Accurate Performance and Conformity Testing in the Field
See SCS item CTE701 - NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration. - 100-240VAC Power Adapter with Interchangeable Plugs
Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe - Assembled in the United States of America with Globally Sourced Materials